Section 11: Utilities; Setting The Date And Time; Adjusting The Date Format - Commtest Instruments vbBalancer Instrument Reference Manual

Section 11: Utilities

This section describes how to use the utility functions of your
instrument.
You will learn to:
Set the instrument date and time
•
Adjust the LCD display
•
Change the LCD interface language
•
Set up direct printing from the instrument
•
Manage the battery pack
•
Release instrument memory
•
Upgrade the instrument's firmware
•

Setting the Date and Time

You can set the time in 12 hour or 24 hour format. Recordings are
date- and time-stamped according to this clock. The instrument
adjusts the date and time automatically to accommodate leap years
and daylight savings. You can also select your local time zone
automatically (see next topic).
From the Main Menu press
•
Press
•
to set the time.
Press the number keys to enter your values; the cursor will
•
automatically advance to the next position. If you enter an
incorrect number press the key repeatedly until the cursor
returns to the beginning of the line then start again.
Press
•

Adjusting the Date Format

From the Main Menu press
•
Press
•
108 Section 11: Utilities
Date/Time then press
to save your changes.
Date/Time
Options.
to set the date or
Options.