Viewing Multiple Charts; Changing Chart View - Commtest Instruments vbBalancer Instrument Reference Manual

Zooming out
Press
•
horizontally and

Viewing Multiple Charts

When you measure more than one channel simultaneously, or
display both a spectrum and waveform, each chart will display
on-screen. You can view the measurements on all charts at the
same time (waveform or spectra only when viewing three of more
measurements simultaneously) or select a specific chart to work
with. When using analysis options such as zooming, these will only
be applied to the selected chart.
Selecting a chart
With the charts displayed press
•
display the hint labels but this will help.)
Press
•
become thicker and darker to indicate that this chart has the
focus. Press
to work with.
Displaying a single chart
To make one chart fill the entire screen select the chart as
•
described in the previous instructions then press
Zoom.
To re-display all charts press
•

Changing Chart View

You can toggle between waveform and spectrum recordings, and set
the default layout of multi-channel and single-channel onscreen
measurements using the Change View and Multi Chart Layout
functions.
66 Section 6: Analyzing Measurements Onsite
X Axis Expand repeatedly to zoom out
to zoom out vertically.
Select Chart. The axes of the selected chart will
repeatedly to toggle which chart you wish
(You don't have to
again.
Chart