Deleting Sensors - Commtest Instruments vbBalancer Instrument Reference Manual

Press the Change Sensor button opposite the channel you
•
will use.
Press
•
existing sensor, or
sensor's normal parameters (name, type, settling, units etc.).
Press
•
screen. Note that each press of
on/off.
Press
•
Press
•
name of the sensor, then press
Press
•
level then press
Press
•
level then press
Press
•
The sensor will now use the new or edited bias values.

Deleting Sensors

From the Main Menu press
•
Press
•
opposite your chosen measuring channel.
Use the left-hand arrows keys to highlight your sensor then
•
press
104 Section 10: Creating, Editing and Deleting Items
Edit Sensor to edit the configuration of an
Create New Sensor. Configure the
Bias Voltage Check to open the Bias Voltage
Create New Bias Voltage.
and enter a name. You may wish to use the
Min Bias and enter the minimum bias Voltage
Max Bias and enter the maximum bias voltage
twice to select the new bias check configuration.
Sensor Setup then press Change Sensor
Delete Sensor.
toggles the Bias check
Options.