Siemens Sinamics S120 Getting Started page 33

3. If the desired adapter is in the list, continue as described in point 6.
4. Select the desired interface on the left-hand side, and then click on "Install-- > ".
5. Select the required interface and close the window.
6. Click in the list box "Interface parameter assignment used:" on the interface parameter
7. Close the "Set PG/PC interface" window by clicking "OK."
Getting Started
Getting Started, (GS1) 04/2014, 6SL3097-4AG00-0BP3
If the required adapter is not included in the list, you must add the appropriate entry. To
do so, click on the "Selection..." button.
The already installed interfaces are located in the window "Install/uninstall interfaces". If
the required interface is not present, you must install it yourself.
Figure 5-3 Selecting the interface
The interface then changes to the right-hand side.
assignment "TCP/IP -> Belkin F5D 5055 Gigabit USB 2.0 Network Adapter."
Creating a drive object
5.2 Setting the communication interfaces
33