Siemens Sinamics S120 Getting Started page 50

Commissioning a drive
Switching off the drive
1. To switch-off the motor, click on the
2. Click on the "Give up control priority!" button to return the control priority.
3. Confirm the following "Return control priority" prompt with "Yes."
4. Go to the menu items "Project > Disconnect from target system" to end the
communication between the PG/PC and the Control Unit.
5. Go to the menu items "Project > Save" to save the example project to the local hard disk
of the PG/PC.
50
The drive coasts to a standstill.
symbol.
Getting Started, (GS1) 04/2014, 6SL3097-4AG00-0BP3
Getting Started