Starter Drive/Commissioning Software; Sinucom Commissioning Tool - Siemens 1FT7 Configuration Manual

2.2

STARTER drive/commissioning software

The easy-to-use STARTER drive/commissioning tool can be used for:
● Commissioning,
● Optimization, and
● Diagnostics
You will find a description in the Intranet under the following address:
http://mall.automation.siemens.com
Select the country and then in the menu bar "Products".
In the navigator, set "Drive Technology" → "Engineering software" → "STARTER
drive/commissioning software"
Download, refer under http://support.automation.siemens.com
2.3

SinuCom commissioning tool

The simple-to-use commissioning software for PC/PG serves to ensure optimum
commissioning of drives with SINAMICS S120/SIMODRIVE 611 digital. You will find a
description in the Intranet under the following address:
https://mall.automation.siemens.com
Select your country and then in the menu bar "Products".
In the navigator, select "Automation Systems" → "SINUMERIK CNC automation systems" →
HMI software for CNC controls" → "Tools" → "SinuCom".
1FT7 Synchronous Motors
Configuration Manual, (PFT7S) 01/2009, 6SN1197-0AD13-0BP2
2.2 STARTER drive/commissioning software
Configuration
43