Routing Cables In A Damp Environment; Construction Types - Siemens 1FT7 Configuration Manual

Information on the application of motors

7.3 Routing cables in a damp environment

7.3 Routing cables in a damp environment
NOTICE
If the motor is mounted in a humid environment, the power and signal cables must be
routed as shown in the following figure.
Figure 7-1
7.4

Construction types

Table 7- 2
Designation
IM B5
IM V1
IM V3
232
Principle cable routing in a moist environment
Designation of the types of construction acc. to IEC 60034-7
Representation Description
Standard
Note:
When configuring the IM V1 and IM V3 type of construction,
attention must be paid to the permissible axial forces (weight
force of the drive elements) and especially to the necessary
degree of protection.
For IM V3 preferably flange form 0
1FT7⃞⃞⃞-⃞⃞⃞⃞0-⃞⃞⃞⃞
Attention must be paid to suitable coverage of the motor shaft
(splash water).
Configuration Manual, (PFT7S) 01/2009, 6SN1197-0AD13-0BP2
1FT7 Synchronous Motors