Starter Drive/Commissioning Software; Configuring Workflow - Siemens SIMOTICS T-1FW6 Series Configuration Manual

Configuration

5.2 Configuring workflow

The configuration process produces the following results:
● A parts list of components required (Export to Excel)
● Technical specifications of the system
● Characteristic curves
● Comments on system reactions
● Installation information of the drive and control components
● Energy considerations of the configured drive systems
You can find additional information that you can download in the Internet at SIZER
(https://support.industry.siemens.com/cs/document/54992004/sizer-for-siemens-
drives?dti=0&pnid=13434&lc=en-WW).
5.1.2

STARTER drive/commissioning software

Core statement
The STARTER commissioning tool offers
● Commissioning
● Optimization
● Diagnostics
Table 5- 1
Commissioning tool
STARTER
German, English, French, Italian, Spanish
5.2 Configuring workflow
Requirements
Your choice of torque motor depends on the following factors:
● The peak and rms torque of the duty cycle required for the application
● The required speed and angular acceleration
● The installation space available
● The required/possible drive arrangement
(single/parallel operation)
72
Article number for STARTER
Article no. of the DVD
6SL3072-0AA00-0AG0
Naturally cooled 1FW6 built-in torque motors
Configuration Manual, 07/2017, 6SN1197-0AE01-0BP3