Olympus FLUOVIEW FV1000 User Manual page 32

26
Image Acquisition
Image Acquisition
(Single Stain on XYZT Image)
(Single Stain on XYZT Image)
3
5
4
1. Adjust the image.
* Refer P17,18
2. Insert ZDC unit to left side.
3. Check "EnableZDC AF during
Time Series Scan"
and click "ZDC setting".
4. Click "Set Offset" to register
auto focus position.
* Note: Have to use glass bottom dish
below, otherwise ZDC doesn't work.
5. Set "Interval" and "Num"
and then click "XYZT" to acquire
the time series image.
* Note: In case of using ZDC for Time series
Scan, follow below limits
Interval number is more than 60 sec,
Rest Time is more than 30 sec,
otherwise ZDC doesn't work.
* If use "TimeControler", Time Series Scan
is able to done even interval number is
within 60sec and Rest Time is within 30sec.
26