Mitsubishi Electric QS001CPU User Manual page 91

10
LOADING AND INSTALLATION
(b) Removal from the QS034B
Remove the module fixing screw.
Then support the module with both
hands and securely press the
module fixing hook*1 with your
finger.
Pull the module based on the
supporting point of module bottom
while pressing the module fixing
hook .
While lifting the module, take the
module fixing latch(*2) off the
module fixing hole.
Completed
Figure 10.19 Module removal procedure
* 1: The power supply module and CPU module has two module fixing hooks on its top. Push the two
module fixing hooks on the right and left of the module top simultaneously with your fingers until
they stop.
Push simultaneously
Module fixing hooks
Figure 10.20 Power supply module and CPU module removal procedure
* 2: The power supply module and CPU module has two module fixing latches. Remove the two
module fixing latches on the right and left of the module bottom from the module fixing holes.
POINT
When removing the module, always remove the module fixing screw(s) first, and
then remove the module fixing projection(s) from the module fixing hole(s).
Attempting to remove the module by force may damage the module fixing latch.
Push
Module fixing
hook *1
Module
connector
Module
Base unit
Module fixing hole
10.2 Module Installation
10.2.3 Installation and removal of module
9
10
Lifting
11
12
10
- 17