2
SYSTEM CONFIGURATION
2.2 Configuration of Peripheral Devices
This section describes the configuration of the peripheral devices usable in the safety
programmable controller system.
QS001CPU
Personal computer
(GX Developer Version 8.40S or later)
* 1: For details of the USB cable, refer to "About the USB cable (QCPU (Q mode) compatible)" of the
following manual.
GX Developer Operating Manual
Figure 2.3 Configuration of peripheral devices
2.2 Configuration of Peripheral Devices
2.1.1 Precautions for system configuration
USB cable*1
2
- 5
1
2
3
4
5
6
7
8