Acquiring The Test Image; Acquiring The Test Image ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙168; Assembling The Vertical Frame Cover ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙168 - Vatech Pax-i PCH-2500 Installation Manual

10 Acquiring the test image

Acquiring the test image
1. Perform the test image acquisition after the software is installed.
2. Ensure that the collimator is well aligned.
When the collimator is misaligned, the correct test image can't be obtained,
in∙which∙case∙the∙alignment∙correction∙must∙be∙performed∙first,∙according∙to∙
the technical manual.
3. Acquire the test image. For further details about the image acquisition, refer to the accompanying
user manual.
For the equipment with the Cephalometric unit, if the noisy image on the
lower part appears, this is caused by the improper leveling between the CEPH
and the column units. Level the CEPH unit again.
For other issues related to the image, refer to the section(s) regarding X-Ray
alignment in the accompanying service manual.
Assembling the vertical frame cover
Truss bolts
Philips screwdriver w/
magnetic tip
168
M4 x 8
Part No.24
Qty: 9
L=200 mm(7.9")
1. Assemble the vertical top cover and fix it with
7 truss bolts(Part No.24).
PaX-i (PCH-2500) Installation Manual