Configuration Parameters Of The Netbox - NetModule NB2500 User Manual

cli status system serial
cli status system os
cli status system nbsw
cli status system cpu
cli status system wireless_module
cli status system ram
cli status system flash
help
5.2.3

Configuration Parameters of the NetBox

The information in this chapter is needed to configure NetBox via the Command Line Interface or File
Configuration. If you are using the Web Manager and its forms to configure NetBox, you may skip this
chapter.
A configuration parameter consists of two main parts, its name (latter called key) and its value. The user
configuration file contains all parameters. Download this file (user-config.cfg) using the Web Manager to
get all parameters listed.
NetModule has defined some types of parameters that are often used. The table below shows the de-
fined parameter types. In addition other types of parameters may exist.
Parameter Allowed characters
Type
email a-z
A-Z
0-9
_-.
@ (mandatory)
hostname a-z
A-Z
0-9
_-.
ipaddress Numbers and dots
netmask Numbers and dots
username a-z
A-Z
0-9
_-.
@
password All but &, \", \'
phone number +
0-9
*
#
time 0-9, and :
User Manual NetBox Wireless Routers
26 October 2011
show the NetBox serial number
show the NetBox operating system
show the NetBox software version
show the NetBox CPU
show the NetBox wireless module
show the amount of RAM installed in the NetBox
show the amount of flash installed in the NetBox
Print the cli help message (usage)
Format Description
user@hostname
Second part must be a valid hostname
Fully-Qualified Host Name (FQHN) or host
name
xxx.xxx.xxx.xxx Decimal dotted notation
xxx.xxx.xxx.xxx Decimal dotted notation
hh:mm:ss Time, e.g. for automatic software or con-
figuration update
netbox_manual_e_v1.4.docx
90/111