NetModule NB2500 User Manual page 85

5.1.8.5.2 Manual Software Update
NB1310: The new software image (e.g. NBSW_3.3.2.4542.bin) can be uploaded using the Web Manager.
NB2xxx: The easiest way to update the NetBox Software (NBSW) is to connect NetBox to network with a
TFTP server. If you only have a Notebook or a PC available the update process involves the preparation of
a TFTP Server
Be aware of any firewall on your PC that may hinder you doing the update! We recommend disabling the
firewall on your PC during the update.
Parameter
Mode:
Protocol:
Server IP address and path:
Last software update:
Step by Step:
Step Description
Connect your PC with NetBox using a network cable.
1.
2. If the IP address has been modified set it back to 192.168.1.1 and the subnet mask to
255.255.255.0 (see also chapter 0).
Your PC must operate in the same subnet as NetBox.
Set the IP address of your PC to 192.168.1.2 and the subnet mask to 255.255.255.0
3.
Download the recommended TFTP server
4.
and start it.
Configure the TFTP server as follows:
User Manual NetBox Wireless Routers
26 October 2011
Description
Update over mobile or Ethernet Interface?
Specify the protocol used to transfer the new software to NetBox.
You will need an appropriate server.
Provide a host name and a path to a server which hosts the new
software.
For local updates (TFTP) this value is limited to 26 characters.
The result of the last try will be displayed here.
netbox_manual_e_v1.4.docx
from our website, install it on your PC
84/111