Responses - NetModule NB2500 User Manual

6.3.2

Responses

HTTP Request
All HTTP Service Interface Com-
mands
All HTTP Service Interface Com-
mands
GET /cli.php?status,[parameters]
GET /cli.php?get,[parameters]
GET /cli.php?set,[parameters]
GET /cli.php?sw-
update,path=<value>
GET /cli.php?reboot
GET
/login.php?usr=<user>,pwd=<pa
ssword>
GET /logout.php
GET
/download.php?file=<fileName>
POST /upload.php
User Manual NetBox Wireless Routers
26 October 2011
Responses (String)
0: device busy
0: login required
<status>
<parameterValue>
0: set failed
1: set ok
1: sw-update started
from <path>
0: maximum length of
path is 26 characters
0: syntax error
1: reboot initiated
1: already logged in
1: already logged in but
supplied credentials do
not match
1: login ok
0: login failed
1: logout ok
1: already logged out
0: download
<fileName> failed
1: upload ok, files re-
placed, reconfiguration
started
1: upload ok, files re-
placed
0: upload failed:
netbox_manual_e_v1.4.docx
Description
The NetBox is busy. Resend the request
later.
This command requires authentication.
Please use login.php first
A single or multiline string with the re-
quested status information
The value of the requested configuration
parameter
HTTP transfer is ok, but changing the
configuration parameter failed.
Software update started. Afterwards re-
quest the Software version with
cli.php?status to verifiy whether it was
successful or nor not
Wrong syntax after in sw-update param-
eters
A restart has been initiated
Already logged in but supplied creden-
tials do not match
Logged in successfully
Login failed
Logout OK
You were not logged in
Download failed
Upload ok, the provided files (e.g.
OpenVPN certificates) were updated, the
user-config.cfg will be applied
No user-config.cfg provided but other
files were updated (e.g. OpenVPN certifi-
cates)
The upload failed
107/111