NetModule NB2500 User Manual page 72

Parameter
SNMP agent status:
Listening Port:
Community:
Contact:
Location:
Trap target host:
Trap target port:
Signal strength trap threshold dBm:
Signal strength trap reactivation
threshold dBm:
SNMP traps are generated in the following situations, if the SNMP agent is enabled:

Startup of the NetBox

Shutdown of the NetBox

VPN connected

VPN disconnected

Signal Strength below
User Manual NetBox Wireless Routers
26 October 2011
Description
Enable or disable the SNMP agent.
SNMP agent port
An SNMP community is the group that devices and management sta-
tions running SNMP belong to.
System maintainer
Location of the device
The host where the traps will be sent to
The port where the traps will be sent to
A trap will be sent, if signal strength goes lower than this.
No further traps will be sent as long as signal strength his not higher
than this.
netbox_manual_e_v1.4.docx
71/111