5.1.7.2
Connection Supervisor
The connection supervisor monitors connectivity and automatically recovers the connections in case of
link loss.
during connections establishment are detected and recovered.
Second the active connection should be monitored. If you are running an IPsec or OpenVPN based VPN
we recommend to use the protocol integrated monitoring service (IPsec DPD or OpenVPN keep-alive).
Else you should configure and enable the ping monitor application.
Parameter
Host 1:
Host 2:
Source IP address:
Monitoring interval:
Retry interval:
Consecutive loss threshold
The recovery actions are:
1. Trying to reestablish a broken connection
User Manual NetBox Wireless Routers
26 October 2011
Description
Reference host 1 to which IP connectivity is checked by sending probes
Reference host 2 to which IP connectivity is checked by sending probes (option-
al)
The test is considered successful if host 1 or 2 answers.
Source IP address to be used as source of the ping probes
The time to wait before sending the next probe in case the last probe was suc-
cessful.
The time to wait until sending the next probe in case the last probe was unsuc-
cessful.
Number of consecutive unsuccessful probes that are required until the next re-
covery action is initiated.
netbox_manual_e_v1.4.docx
59/111
Need help?
Do you have a question about the NB2500 and is the answer not in the manual?