NetModule NB2500 User Manual page 58

5.1.6.4 Dial-in Server
On this page the Dial-in server of NetBox can be administrated and configured. Users that are allowed to
dial-
5.1.6.4.1 Dial-in Server Administration
Parameter
Dial-in administrative status:
Dial-in operational status:
5.1.6.4.2 Dial-in Server Configuration
Parameter
Address range start:
Address range size:
Disable NAPT on dial-in
User Manual NetBox Wireless Routers
26 October 2011
Description
The Dial-in server can be enabled or disabled. Consequently the device will allow
incoming calls or not.
Shows whether a connection is active or not
Description
Start address of the range for the dial-in server.
Number of addresses that the dial-in server can assign.
Disable NAPT on dial-in is recommended.
netbox_manual_e_v1.4.docx
.
57/111