Group Handling Totalizer - Endress+Hauser Proline Prowirl 73 Operating Instructions Manual

Proline Prowirl 73
Endress+Hauser
11.2.7

Group HANDLING TOTALIZER

Function description HANDLING TOTALIZER
RESET ALL TOTALIZERS Use this function to reset the sum and the overflow of both totalizers to 0 (= RESET).
Options:
NO
YES
Factory setting:
NO
FAILSAFE MODE Use this function to define the response of both totalizers to an alarm condition.
Options:
STOP
The totalizer does not continue to count the flow if a fault is present. The totalizer stops
at the last value before the alarm condition occurred.
ACTUAL VALUE
The totalizer continues to count the flow on the basis of the current flow data. The fault
is ignored.
HOLD VALUE
The totalizer continues to count the flow on the basis of the last valid flow data (before
the fault occurred).
Factory setting:
STOP
11 Description of device functions
115