Table of Contents
Advertisement
2-27. Using communication function
Communication function can download the sewing data created with other sewing machine, creation of
sewing data and sewing data created by editing device PM-1 to the sewing machine. In addition, the
function can upload the aforementioned data to the media or personal computer.
As the means of communication, a media slot and USB port are prepared.
* However, SU-1 (data server utility) is necessary to perform download/upload from the personal
computer.
(1) Handling possible data
Sewing data that can be handled are 4 kinds below, and the respective data formats are as shown be-
low.
Data name
Vector format data
M3 data
Sewing standard format
data
Simplified program data
* For the simplified program, see the Engineer's Manual.
(2) Performing communication by using the media
For handling way of the media, read
(3) Performing communication by using USB
Extension
It is the data of needle entry point created with
VD00XXX.VDT
PM-1, and the data format that can be operated
in common between JUKI sewing machines.
AMS0XXX.M3
Pattern data for the AMS-B, -C and -D Series
SD00XXX.DAT
Data of sewing standard format
AMS0XXX.PRO
Simplified program data
"II-1. PREFACE"
p.11.
Data can be sent/received to/from a personal
computer or the like, by means of a USB cable.
– 70 –
Description of data
If the contact part becomes dirty,
failure of contact will be caused. Do
not touch by hand, and control so
that dust, oil or other foreign materi-
al does not adhere to it. In addition,
the inside element is damaged by
static electricity or the like. So, be
very careful when handling.
xxx : file No.
Advertisement
Table of Contents
