Vislink UltraCoder Operator's Manual page 30

5.4.3.3.4.
Selecting this option will initiate a reboot of the unit. To perform this action change the setting to
YES and then press the Enter button.
5.4.4. H
ELP
These menus provide information regarding the unit's software versions, plus contact details should
help from our customer support be required. Please refer to the serial and version numbers when
contacting customer support.
5.4.4.1.
This menu displays the physical serial number of the unit, the current build version of the software
and kernel version.
5.4.4.2.
This menu displays the version numbers for the internal encoder module.
5.4.4.3.
This menu displays contact information for Vislink customer support in the event that it is required.
Issue : 3 (16/12/2015)
Ref : ULTC-ASUM-7001
Reboot
U V
NIT ERSION
E V
NCODER ERSION
S
UPPORT
UltraCoder Operators Manual
Menu Navigation
Page : 26
Copyright © Vislink plc