Vislink UltraCoder Operator's Manual page 17

5.1.1.1.4.
This item allows for the service name to be defined.
Note that the name is restricted to a maximum of twelve characters.
This item allows for the Video PID to be defined for the encoding.
Note that valid values range from 32 to 8190.
This item allows for the Program Clock Reference PID to be defined for the encoding.
Note that valid values range from 32 to 8190.
This item allows for the Program Map Table PID to be defined for the encoding.
Note that valid values range from 32 to 8190.
Select this option in order to view additional configurable PID options.
This item allows for the Program Number to be defined for the encoding.
Note that valid values range from 1 to 255.
5.1.1.2.
5.1.1.2.1.
This option defines whether to apply BISS encryption to the encoded video.
5.1.1.2.2.
This item defines which of the two BISS modes should be used when encrypting the video. The type
can be set to either BISS 1 or BISS E, whereby with BISS 1 only the Key needs to be set, but with BISS
E both the Key and Injected ID must be configured.
5.1.1.2.3.
This item allows for the key to be defined. When editing the up and down buttons will change the
character, and the left and right buttons can be used to select which character to change.
Note that when BISS 1 is in use this key will be twelve characters long, whereas when using BISS E it
will be sixteen characters in length. Also, only hexadecimal characters may be entered (i.e. 0-9 and
A-F).
Issue : 3 (16/12/2015)
Ref : ULTC-ASUM-7001
PIDs
5.1.1.1.4.1. Service
5.1.1.1.4.2. Video PID
5.1.1.1.4.3. PCR PID
5.1.1.1.4.4. PMT PID
5.1.1.1.4.5. MORE >
5.1.1.1.4.5.1. Prog Number
S
CRAMBLING
Scrambling
Type
Key
UltraCoder Operators Manual
Menu Navigation
Page : 13
Copyright © Vislink plc