Vislink UltraCoder Operator's Manual page 24

Note that valid values range from 32 to 8190.
This item allows for the Program Clock Reference PID to be defined for multiplexing the video from
the ASI In connector.
Note that valid values range from 32 to 8190.
This item allows for the Video PID to be defined for multiplexing the video from the ASI In connector.
Note that valid values range from 32 to 8190.
Select this item to view further service information to edit.
These eight items provide the ability to configure the Audio PIDs for multiplexing the video from the
IP Video connector.
Note that valid values are 0 and the range from 32 to 8190. Zero may be entered for these items if
the Audio PID is unused, in order to prevent clashes with other services.
5.3.2.4.2.
This menu provides the ability to configure the service settings for multiplexing the video received
via the ASI In connector on the rear panel.
This item is used to define the name of the service to use when multiplexing the video from the IP
Video connector.
Note that the maximum amount of characters that may be entered is twelve.
This item is used to define the program number of the service to use when multiplexing the video
from the IP Video connector.
Valid values range from 1 to 65535.
This item allows for the Program Map Table PID to be defined for multiplexing the video from the IP
Video connector.
Note that valid values range from 32 to 8190.
This item allows for the Program Clock Reference PID to be defined for multiplexing the video from
the IP Video connector.
Issue : 3 (16/12/2015)
Ref : ULTC-ASUM-7001
5.3.2.4.1.4. PCR
5.3.2.4.1.5. Video PID
5.3.2.4.1.6. MORE >
5.3.2.4.1.6.1. PID 1..8
External IP PIDs
5.3.2.4.2.1. Service
5.3.2.4.2.2. Prog Number
5.3.2.4.2.3. PMT
5.3.2.4.2.4. PCR
UltraCoder Operators Manual
Menu Navigation
Page : 20
Copyright © Vislink plc