Vislink UltraCoder Operator's Manual page 25

Note that valid values range from 32 to 8190.
This item allows for the Video PID to be defined for multiplexing the video from the IP Video
connector.
Note that valid values range from 32 to 8190.
Select this item to view further service information to edit.
These eight items provide the ability to configure the Audio PIDs for multiplexing the video from the
IP Video connector.
Note that valid values are 0 and the range from 32 to 8190. Zero may be entered for these items if
the Audio PID is unused, in order to prevent clashes with other services.
5.3.3. I
DENTIFIERS
This section defines global identifiers for the encoded video output.
5.3.3.1.
This option provides the facility to define a network name for the output.
Note that the maximum length of the name is twelve characters.
5.3.3.2.
This option provides the facility to define the network ID for the output video. Valid values range
from 0 to 65535.
5.3.3.3.
This option provides the facility to define the transport stream PID for the output video. Valid values
range from 0 to 65535.
Issue : 3 (16/12/2015)
Ref : ULTC-ASUM-7001
5.3.2.4.2.5. Video PID
5.3.2.4.2.6. MORE >
5.3.2.4.2.6.1. PID 1..8
N
ETWORK
N ID
ETWORK
TS PID
UltraCoder Operators Manual
Menu Navigation
Page : 21
Copyright © Vislink plc