Panel Description; Front Panel - Icom IC-M700PRO Instruction Manual

■ Front panel

This function is not installed
in the IC-M700PRO.
iM 700PRO
MICROPHONE
POWER
q w
q MICROPHONE CONNECTOR (p. 16)
Accepts the supplied microphone or an optional
handset.
☞ N OTE: No audio is output to the speaker when
the microphone or handset is not connected.
w POWER SWITCH [POWER]
Turns power ON or OFF.
e SPEAKER SWITCH [SPEAKER]
Turns the built-in speaker ON or OFF.
• "è" appears in the display while the speaker is turned
OFF.
• Any external speaker connected to the rear panel is not
turned OFF.
r DISPLAY INTENSITY SWITCH [DIMMER]
Turns the display backlighting ON or OFF.
t VOLUME CONTROL [VOLUME]
Adjusts the audio output level.
• No sound is output to the speaker when:
➥ A microphone is not connected.
➥ The [SQL] switch is turned ON and no signal is being
received.
y GROUP CHANNEL SELECTOR [GROUP]
In the memory mode, selects 1 of 3 channel groups
("A," "B" or "C"). (p. 5)
• In the VFO mode, it has no function.
➥ Selects an item in the set mode. (p. 11)
TX FREQ
ALM
RX
2182KHz
TX
RESET
DSC
[ALARM] + [TX FREQ]
FOR ALARM TX
MODE
GROUP
VOLUME
SPEAKER
DIMMER
e r t

PANEL DESCRIPTION

SSB RADIO TELEPHONE
AGC N B SQL
TUNE
CHANNEL
y u
u ANTENNA TUNE SWITCH [TUNE] (p. 8)
Tunes the external tuner to the antenna.
• Activates only when an optional antenna tuner such as
Icom's AT-130 is connected.
☞
N OTE: When selecting "automatic tuning" in the
set mode, pushing this switch is not necessary
to tune the antenna. (p. 11)
i CHANNEL SELECTOR [CHANNEL] (p. 5)
➥ In the memory mode, selects an operating chan-
nel within the selected channel group.
• A maximum of 50 channels are available in each
channel group, depending on set mode setting (pgs.
13 and 14).
➥ In the VFO mode, changes the operating fre-
quency in 0.1 kHz steps.
• Frequencies selected in the VFO mode are tempo-
rary.
o SCAN SWITCH [SCAN] (p. 6)
Push to toggle the scan ON or OFF.
!0 CLARITY CONTROL [CLARITY] (p. 9)
Shifts the receive frequency ±150 Hz for clear re-
ception of an off frequency signal.
1 2 3
4 5 6
7 8 9
F
CL 0 CH/FREQ
SCAN
T ONLY ENT
CLARITY
i o !0
2
2