■ Connector information
ACC(1)
PIN PIN NAME
1
2
3
2
4
5
4
1
3
8
6
7
5
6
7
8
ACC(2)
PIN PIN NAME
1
2
2
4
5
3
1
3
4
6
7
5
6
7
MICROPHONE
PIN
PIN NAME
1
2
3
1
2
7
3
4
8
6
4
5
5
6
7
8
TUNER
PIN
PIN NAME
1
1
2
2
3
4
3
4
DESCRIPTION
CWK
CW and FSK keying input.
GND
Connects to ground.
Input/output pin.
SEND
Goes to ground when transmitting.
When grounded, transmits.
Modulator input.
MOD
Usable when pin 3 is grounded.
AF detector output.
AF
Fixed, regardless of the [AF] position.
NC
No connection.
13.6 V
13.6 V output when power is ON.
ALC
ALC voltage input.
DESCRIPTION
8 V
Regulated 8 V output.
GND
Same as ACC(1) pin 2.
SEND
Same as ACC(1) pin 3.
NC
No connection.
ALC
Same as ACC(1) pin 8.
RLC
T/R relay control output.
13.6 V
Same as ACC(1) pin 7.
DESCRIPTION
Audio input from the microphone
MIC+
element.
NC
No connection.
AF output controlled with [VOLUME].
AF1
Connected to pin 4 in the microphone.
AF input.
AF2
Connected to pin 3 in the microphone.
PTT
PTT switch input.
GND
Connected to ground.
MIC–
Coaxial ground for MIC+.
AF–
Coaxial ground for AF1 and AF2.
DESCRIPTION
KEY
Key signal input.
START
Start signal output.
13.6V
13.6 V output
_ terminal
E
CONNECTIONS AND INSTALLATION
SPECIFICATIONS
Input level: Less than 0.6 V for transmit.
Connected in parallel with ACC(2) pin 2.
Ground level: –0.5 to 0.8 V
Input current: Less than 20 mA
Connected in parallel with ACC(2) pin 3.
Input impedance: 10 kø
Input level: Approx. 100 mV rms
Output impedance: 4.7 kø
Output level: 100–300 mV rms
Output current: Max. 1 A
Connected in parallel with ACC(2) pin 7.
Control voltage: –3 to 0 V
Input impedance: More than 10 kø
Connected in parallel with ACC(2) pin 5.
SPECIFICATIONS
Output voltage: 8 V ±0.3 V
Output current: Less than 10 mA
When transmitting: 0 V (less than 0.5 A)
SPECIFICATIONS
Input impedance: 600 ø
Output impedance: 4 ø
When grounded, transmits.
SPECIFICATIONS
–0.5 to 0.8 V during tuning
Pulled up 8 V, 0 V(100 msec) as start signal.
Max. current: 2 A
Ground
6
16
Need help?
Do you have a question about the IC-M700PRO and is the answer not in the manual?
Questions and answers