Resetting The Cpu - Icom IC-M700PRO Instruction Manual

3
SELECTING A CHANNEL/FREQUENCY

■ Resetting the CPU

Under some circumstances, the transceiver's internal
CPU may cause erroneous indications on the display.
If this happens, reset the CPU as follows:
While pushing [ENT] and [0], push [POWER] to turn
power ON.
• The CPU is reset and the display at right appears.
C AUTION:
Resetting the CPU returns the set mode
contents to their default values.
7
RX
SIMP
Group A, channel 1 is
selected after resetting
the CPU.