Icom IC-M700PRO Instruction Manual page 6

2
PANEL DESCRIPTION
■ Front panel (Continued)
This function is not installed
in the IC-M700PRO.
MICROPHONE
!1 KEYPAD
No function*.
CL
Toggles between the memory mode and the
CH/FREQ
VFO mode. (p. 5)
• This key may be disabled by your dealer.
No function*.
T ONLY
N o function*.
ENT
0
No function*.
to
9
* These keys function in some versions. See the separate
KEYPAD OPERATION and CHANNEL LIST instruction
sheet for operating details.
!2 SQUELCH SWITCH [SQL] (p. 9)
Activates the voice squelch function to reject unde-
sired background noise while no signal is being re-
ceived.
• The squelch opens only when the received signal con-
tains no voice or FSK components.
3
!7 !6
iM 700PRO
TX FREQ
2182KHz
RESET
[ALARM] + [TX FREQ]
FOR ALARM TX
VOLUME
SPEAKER
POWER
DIMMER
!5 !4 !3
SSB RADIO TELEPHONE
ALM
RX
TX
DSC
0
MODE AGC N B
TUNE
GROUP
!3 NOISE BLANKER SWITCH [NB] (p. 9)
T urns the noise blanker function ON to remove
pulse-type noise such as engine ignition noise.
• "NB" appears when the function is turned ON.
!4 AGC OFF SWITCH [AGC] (p. 9)
D eactivates the AGC function to receive weak sig-
nals blocked by strong adjacent signals.
• "ê" appears when the [AGC] switch is turned ON
(stands for AGC deactivated).
!5 MODE SWITCH [MODE]
T emporarily selects an operating mode. Available
modes differ with the transceiver version.
• USB, AM, J2B (AFSK), FSK, R3E and CW modes are
available.
• The temporary mode is cleared and the previous mode
appears when changing a channel.
!6 TRANSMIT FREQUENCY SWITCH [TX FREQ]
(p. 8)
D isplays the transmit frequency and opens the
squelch to check and monitor the transmit fre-
quency.
!7 2182 kHz SELECTION SWITCH
[2182KHz •
➥ Selects channel 0 (2182 kHz; distress call fre-
quency).
• The channel selector does not function when select-
ing channel 0.
➥ Ignores external control and gives the front
panel control priority when an external control-
ler (NMEA format) is connected.
!2
1
4
7
F
CL
SQL SCAN
T ONLY
CHANNEL
CLARITY
] (p. 5)
reset
2 3
5 6
8 9
!1
CH/FREQ
0
ENT