Disassembling The Transceiver; D Opening The Case; Fuse Replacement; Ddc Power Cable Fuse - Icom IC-M700PRO Instruction Manual

6
CONNECTIONS AND INSTALLATION

■ Disassembling the transceiver

D Opening the case

Follow the case and cover opening procedures
shown here when you want to adjust a setting for
non-Icom tuner control.
q Remove the 9 screws from the rear panel, then re-
move the rear frame and rear sealing.
w Remove the transceiver case.
e When reassembling the transceiver, check the fol-
lowing points:
➥ Internal fan and slits in the case are on the
same side.
➥ Front sealing is mated correctly.
➥ R e a r s e a l i n g i s a t t a c h e d i n t h e p r o p e r
orientation.
➥ Screws are tightened securely.

■ Fuse replacement

The fuses are installed in the DC power cable and
the circuitry in the body, to protect the transceiver.
DC power cable fuse
D
21
FGB 30 A
Rear frame
Circuitry fuse
D
5 A
Front sealing
Rear sealing