I Resetting The Cpu - Icom M700PROE Instruction Manual

I Resetting the CPU

Under some circumstances the transceiver's internal
CPU may cause erroneous indications on the display.
If this happens, reset the CPU as follows:
While pushing [ENT] + [0], push [POWER] to turn
power on.
• The CPU is reset and the display at right appears.
CAUTION:
Resetting the CPU returns set mode
contents to their default values.
SELECTING A CHANNEL
RX
SIMP
3
Group A, channel 1 is
selected after resetting
the CPU.
7