Control Identification - HWH 625 SERIES Operator's Manual

TRAVEL CLAMPS ENGAGED
INDICATOR LIGHT
KEY SWITCH
KEY
KEY SWITCH: The KEY SWITCH controls power to the ROOM
CONTROL SWITCH. When the KEY SWITCH is in the "ON"
position the room can be operated and the key cannot be
removed. When the KEY SWITCH is in the "OFF" position
the room cannot be operated, and the key can be removed.
ROOM CONTROL SWITCH: The ROOM CONTROL SWITCH
is a two position momentary switch. Pressing the switch in the
EXTEND position will extend the room. Pressing the switch
in the RETRACT position will retract the room. Releasing
the ROOM CONTROL SWITCH will halt the operation of the
room.

CONTROL IDENTIFICATION

ROOMS WITH TRAVEL CLAMPS
ROOM OPERATOR'S PANEL
WHEN RETRACTING THE ROOM RELEASE
SWITCH WHEN BOTH LIGHTS COME ON
HW
CORPORATION
HYDRAULIC ROOM EXTENSION
OFF
ON
CAUTION!
UNDERSTAND OPERATOR'S MANUAL BEFORE
USING. KEEP PEOPLE AND OBSTRUCTIONS
CLEAR OF ROOM WHEN OPERATING.
CONTROL FUNCTIONS
H
R
ROOM EXTEND
ROOM RETRACT
TRAVEL CLAMPS ENABLED INDICATOR LIGHT: These
lights only come on if the Room Control Switch is being
pushed to ROOM RETRACT. The ignition must be on and
the room panel Key Switch must be on. These lights will
come on when the room is fully retracted and the Travel
Clamps are fully extended.
TRAVEL CLAMPS ENGAGED
INDICATOR LIGHT
ROOM CONTROL
SWITCH
MP25.3060
02MAY03