Installation - Safety Vision OBSERVER 4100 HVR User Manual

OBSERVER 4100 HVR HARDWARE USER GUIDE
6

Installation

Flat Mount
Secure the HVR to the surface with self-tapping
screws or rivets.
Ensure that the front panel of the HVR remains
accessible and there is a minimum 2.5 inches of
clearance for cables.. Do not install the HVR in an
area of the vehicle cabin that could interfere with
the safe operation of the vehicle.
Security Cover
After connecting all needed cables to the rear of
the HVR as shown in the Main Wiring Diagram,
secure the Security Cover with the included Phillips
head screws as shown in the diagram.