Fagor 8065 M Manual page 43

P a n e l P C .
3 PPC-21W.
Panel PC with 21.5 multi-touch monitor to control, operate and monitor the CNC via an
ethernet connection. The PPC-21W allows the user to operate the CNC using the touch
screen or a USB keyboard (for example, the HORIZONTAL KEYB 2.0 + TOUCHPAD). In both
cases, the user can work with the PPC in just the same way as if being in front of the CNC
screen.
The PPC may be a standalone monitor or workstation (for example, with a modular central
unit) or it may be a second monitor or workstation (for example, with an integrated central
unit).
Module.
PPC-21W----
PPC-21W-----M128
The CNC to which the PPC-21W will be connected must have the connection enabled
through the remote desktop (with RDP protocol support) as well as a functional Ethernet
connection with the correct parameters set. The FagorConnect application, which can be
installed on the Panel PC, makes it possible to simplify the configuration of the connection
between a Panel PC and the CNC.
Description.
• Panel PC with a 21.5" (1920 × 1080), 24-bit
color, 16:9 aspect ratio monitor.
• Capacitive multi-touch
• Storage: 16 GB SSD.
• Panel PC with a 21.5" (1920 × 1080), 24-bit
color, 16:9 aspect ratio monitor.
• Capacitive multi-touch
• Storage: 16 GB SSD + 128 GB SSD.
3.
CNC 8065
(R : 1801)
EF
·43·