Table of Contents
Advertisement
P a n e l P C .
3.6.2
Monitor (lower end connectors).
Bottom view.
(A)
T/S RS-232
(B)
T/S USB Touch screen driver.
(C)
24 V DC IN
(D)
12 V DC IN
(E)
DVI-D
(F)
VGA
(G)
·T/S USB· Touch screen driver.
Connect the monitor's T/S USB (touch controller) output to a USB 2.0 port on the panel PC.
Always use the cable supplied by Fagor for the unit.
·24 V DC IN· Supply input (recommended).
Option recommended by Fagor Automation to power the monitor.
1
·12 V DC IN· Supply input (not recommended).
Fagor Automation recommends 24 V DC power for the monitor. Consult Fagor Automation before using
i
the 12 V DC option.
Both monitor power suppliers (24 and 12 V DC) must never be connected at the same time.
·VGA· VGA Video input.
Connect the panel PC's PCVGA output to the monitor's VGA input. Always use the cable
supplied by Fagor for the unit.
A
B
C
Non-functional on the PPC-21W.
24 V DC supply input (recommended).
12 V DC supply input (not recommended).
Non-functional on the PPC-21W.
VGA video signal input.
Ground connection.
Plug-in part 3-pole Phoenix-type connector (5.08 mm pitch).
Rated current; 16 A.
Pin
Signal.
1
2
11
3
+24 V
Connector data.
Number of poles.
Pitch.
Connection technique.
Minimum/maximum section.
Rated current In.
Cable data.
Length to be stripped.
See
"3.5 Voltage supply for the module."
DC jack connector for the external current adapter. See
"3.5 Voltage supply for the module."
D
E
Ground connection.
G
Function.
- - -.
0 V reference signal.
Power supply.
3.
5.08 mm.
Screw connection.
0.2 / 4 mm².
16 A.
7 mm.
on page 53.
on page 53.
F
3.
CNC 8065
(R
: 1801)
EF
·55·
Advertisement
Table of Contents
