Point-To-Point Connection With The Cnc - Fagor 8065 M Manual

P a n e l P C .
4.2 General diagram (PPC-19 ).
4.2.1

Point-to-point connection with the CNC.

ETHERNET
CNC U65
CNC U70
OP PANEL
Connection.
USB 2.0
Ethernet.
CAN
PPC-19
HORIZONTAL KEYB 2.0 +
TOUCHPAD
CAN
Description.
Connection of a USB keyboard to the PPC-19.
Maximum length; 800 mm (2.62 feet).
Connection of the PPC-19 to the CNC.
Maximum length; 100 m (328 feet).
Connection of keyboards and operator panels.
Maximum length of bus; 500 m (1640 ft) for CANopen bus.
USB 2.0
HBH3
HANDHELD TERMINAL
4.
ETHERNET
CNC 8065
(R
EF
: 1801)
·75·