The Fagorconnect Application - Fagor 8065 M Manual

5.2
5.
CNC 8065
(R : 1801)
EF
·86·

The FagorConnect application.

The main objective of the application is to connect the Panel PC to the CNC through the
remote Desktop as soon as the application starts and in a way that is transparent to the user.
After establishing the connection, the Panel PC will display the same information as the CNC,
so that the user can work with the Panel PC just as if it were a screen connected to the CNC.
Once the application parameters have been configured and saved, it is not necessary to
enter any additional information or take any other action. The application will display the
message "Connecting..." while it tries to connect to the CNC (via TCP/IP). The dwell time
and the IP address of the CNC are defined in the FagorConnect.ini configuration file and can
be modified from the application.
• After the dwell time, if the application has not been able to establish the connection to
the CNC, it will display the error message: "Connection could not be established." After
pressing the "OK" button, the main application screen appears.
• If the application establishes the connection with the CNC, it will launch the remote
desktop application and will send the following parameters:
• Name or IP address of the CNC.
• Username and password of the CNC.
• The option to share Panel PC memory devices with the CNC (including USBs).
• Size of the remote Desktop window.
P a n e l P C .