Work Modes - Fagor 8065 M Manual

5.4
5.
CNC 8065
(R : 1801)
EF
·88·

Work modes.

The "Protection" button at the top shows the window to select the operating mode of the Panel
PC (user mode or administrator mode). These operating modes are not available when the
FagorConnect application is installed on a PC.
The Panel PC can be in User mode or Administrator mode. To change the operating mode,
press the "Change Mode" button. The application will request confirmation to change the
operating mode, which will require you to log out of the Remote Desktop and restart the Panel
PC.
• In administrator mode, the entire hard drive is unprotected; the user can perform any
operation, such as install a version of FagorConnect, install third-party applications,
configure TCP/IP parameters, etc.
• In user mode, the entire hard drive is write protected, except for the following files and
folders.
• $Recycler.bin
Recycling bin.
• C:\Public
Network shared folder.
• C:\Program Files (x86)\Fagor Automation\FagorConnect\FagorConnect.ini
Configuration file for the FagorConnect application.
• C:\Program Files (x86)\Fagor Automation\FagorConnect\FagorConnect.rdp
Configuration file for the remote desktop connection.
In administrator mode, the buttons "Add new file/folder" and "Remove file/folder" allow you
to add and remove files/folders in the protected files/folders list. The user mode does not
allow you to change the list of protected files/folders. The three files and folders indicated
above cannot be deleted from the list.
P a n e l P C .