Table of Contents
Advertisement
P a n e l P C .
3.5
Voltage supply for the module.
The monitor and the panel PC require separate power supplies; it is necessary to power both
modules.
(A)
Monitor power: 24 V DC (recommended).
(B)
Monitor power: 12 V DC (consult Fagor Automation).
(C)
Panel PC power: 24 V DC.
The monitor has two different voltage power supply ports (24 and 12 V DC). Fagor
Automation recommends using 24 V DC (Phoenix-type connector) to power the monitor.
Consult Fagor Automation before using the 12 V DC option (DC jack connector).
Both monitor power suppliers (24 and 12 V DC) must never be connected at the same time.
Monitor power: 24 V DC.
Power the monitor with a 24 V DC ±10 % 1.5 A power supply.
1
Panel PC power: 24 V DC.
Power the panel PC with a 24 V DC ±20% 1.5 A power supply.
1
Power supply cable characteristics.
Use generic 12 AWG (4 mm²) to 18 AWG (1 mm²) cable.
Consumption.
Consumption: 55 W (typical), 100 W (max.).
A
B
Pin
Signal.
Function.
1
- - -.
2
11
0 V reference signal.
3
+24 V
Power supply.
Pin
Signal.
Function.
1
Ground.
2
–
0 V reference signal.
3
+
Power supply.
C
3.
CNC 8065
(R
: 1801)
EF
·53·
Advertisement
Table of Contents
