Fagor 8065 M Manual page 33

P a n e l P C .
·24 V DC IN· Supply input (recommended).
Option recommended by Fagor Automation to power the monitor.
1
·12 V DC IN· Supply input (not recommended).
Power supply.
i
Fagor Automation recommends 24 V DC power for the monitor. Consult Fagor Automation before using
the 12 V DC option.
Power supply.
Never connect both power systems at the same time.
·VGA· Video input.
1 ... 5
11 ... 15
·DVI-D· Video input.
Consult Fagor Automation before using the DVI-D video input.
i
Plug-in part 3-pole Phoenix-type connector (5.08 mm pitch).
Rated current; 16 A.
Pin Signal. Function.
1 - - -.
2 11 0 V reference signal.
3 +24 V Power supply.
Connector data.
Number of poles.
Pitch.
Connection technique.
Minimum/maximum section.
Rated current In.
Cable data.
Length to be stripped.
See "2.5 Voltage supply for the module."
DC jack connector for the external current adapter. See
"2.5 Voltage supply for the module."
Plug-in part 15-pin female SUB-D HD type connector.
Pin. Signal.
1 MAINS
2 GREEN
3 BLUE
4 - - -
5 11
6 GND_RED
7 GND_GREEN
8 GND_BLUE
9 - - -
10 GND_SYNC
11 - - -
12 - - -
13 HSYNC
14 VSYNC
15 - - -
3.
5.08 mm.
Screw connection.
0.2 / 4 mm².
16 A.
7 mm.
on page 30.
on page 30.
2.
CNC 8065
(R : 1801)
EF
·33·