Voltage Supply For The Module - Fagor 8065 M Manual

2.5
2.
CNC 8065
(R : 1801)
EF
·30·

Voltage supply for the module.

The monitor has two power supply connections. Fagor Automation recommends using 24 V
DC (Phoenix-type connector) to power the monitor. Consult Fagor Automation before using
the 12 V DC option.
Never connect both power systems at the same time.
24 V DC universal power supply.
Option recommended by Fagor Automation to power the monitor. Power the monitor with
a 24 V DC ±10% 1.5 A power supply.
1
Power supply cable characteristics.
Use generic 12 AWG (4 mm²) to 18 AWG (1 mm²) cable.
Consumption.
Maximum consumption: 25 W.
Pin Signal. Function.
1 - - -.
2 11 0 V reference signal.
3 +24 V Power supply.
P a n e l P C .