Showing Trunk Statistics - Huawei Quidway S1700 Series Web User Manual

Quidway S1700 Series Ethernet Switches
Web User Manual
To show/delete the member of the trunk:
1. Click Interface > Trunk > Static. Select Show/Delete Member from the Action list.
4-13
Figure 4-13 Showing/Deleting Member of the Trunk
2. Click Delete.
----End
To Config LACP Member of the trunk:
1. Click Interface > Trunk > Static. Select Config LACP Member from the Action list.
4-14
Figure 4-14 Config LACP Member of the Static Trunk
2. Set the trunk member and the priority.
----End

4.2.3 Showing Trunk Statistics

Use the Interface > Trunk > Statistics page to display standard statistics on network traffic
from the trunk. Trunk statistics display errors on the traffic passing through each port. This
information can be used to identify potential problems with the switch (such as a faulty port
or unusually heavy loading). All values displayed have been accumulated since the last
system reboot, and are shown as counts per second.
To show a list of trunk statistics:
1. Click Interface > Trunk > Statistics.
2. Select a trunk from the drop-down list.
3. Use the Refresh button at the bottom of the page if you need to update the screen.
Issue 01 (2011-11-17)
is displayed.
is displayed.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Figure 4-15 is displayed.
4 Interface Configuration
Figure
Figure
34