Nfc Operation; Aux Operation - Sandstrom SBTBR14 Instruction Manual And Users Manual

NFC Operation

NFC is a one touch way of pairing your NFC device via Bluetooth to your speaker.
1. Activate NFC on your mobile device.
2. Place the NFC sensor area on the device close to the unit's NFC sensor area (it will work
best within 10 mm) to connect your device to the unit.
3. Place the NFC sensor area on the device close to the unit's NFC sensor area again to
disconnect Bluetooth connection.
If you are trying to pair your speaker to a mobile device and your mobile device shows the message '
failed to connect and password is incorrect' , then switch the unit off at the mains switch, wait 1 minute
then switch the unit back on. Try pairing again using bluetooth or NFC modes.

AUX Operation

1. There is a AUX LINE IN Socket located at the rear of the unit. Analogue audio sound
signals from other sources can be input to the unit through this socket.
2. Connect the input to another audio device via an AUX cable with AUX LINE IN socket.
3. Press VOL +/– to adjust the volume control for your desired sound output level.
4. In AUX mode, operate your audio device directly for playback features.
• When connecting the external audio device, refer to the owner's manual of the external device, as well
as the manual.
• Examples of External Audio Device that can be connected to the unit are: Portable MP3 Players,
Cassette Players, Mini Disc Players, DVD Players, etc.
12