Handling The Remote Control; Remote Control Operation Range; Mains Power; Connecting To The Mains Supply - Sandstrom SPH1512 Instruction Manual

Docking for iphone and ipod
Table of Contents

Advertisement

Handling the Remote Control

• If you are having difficulty removing the battery cover, use a paper clip to squeeze the
battery tab before pulling out the battery cover. Remove the battery.
• Do not drop the remote control.
• Do not allow anything to impact the remote control.
• Do not spill water or liquid on the remote control.
• Do not place the remote control on a wet object.
• Do not place the remote control under direct sunlight or near sources of excessive heat.
• Remove the battery from the remote control when not in use for a long period of time,
as corrosion or battery leakage may occur and result in physical injury, and/or property
damage, and/or fire.

Remote Control Operation Range

• The remote control sensor on the front unit is
sensitive to the remote control's commands up
to a maximum of 5 metres away and within a
maximum of a 60° arc.
• Please note that the operating distance may vary
depending on the brightness of the room.

Connecting to the Mains Supply

Mains Power

• This unit is designed to operate with a DC
12V/2A mains adapter (included).
• Unwind the mains cable to its full length.
Connect the other end of the mains cable
to the DC IN Socket at the rear of the unit
then connect the mains adapter to the mains
socket. Make sure the mains adapter is firmly
inserted into the mains socket. The unit is
now connected and ready to use.
• To switch the unit off completely, remove
the mains adapter from the mains socket.
Ensure all connections are connected before connecting to the mains
power socket.
8
Within about 5m
DC IN
AUX IN
VIDEO OUT
30°
30°
DOCK
AUX
MENU
ENTER
ROCK
POP
POP
CLASSIC
JAZZ
FLAT

Advertisement

Table of Contents
loading

Table of Contents