Table of Contents
Advertisement
Connecting Audio Device
1. Adjust the volume to minimum first to avoid the voice is over.
2. Use a 3.5mm to 3.5mm stereo audio cable to connect your PC or other audio device to
the Right Speaker's AUX IN
3. Adjust the volume to your desired level by pressing the volume +/– buttons.
4. Check that your PC volume level is sufficient.
General Operation
Powering ON/OFF
When you first connect the unit to the mains socket, the unit will be in OFF mode.
Press and hold the SOURCE button to switch the unit to ON mode. The LED indicator
•
will light up.
Press and hold the SOURCE button to switch the unit to OFF mode. The LED indicator
•
will turn off.
• When the unit is idle for approximately 20 minutes, it will automatically switch
to standby. The LED indicator will turn off.
• Please turn the unit off completely to save energy when not in use.
Selecting Modes
Press SOURCE repeatedly to switch between Bluetooth and AUX modes. The LED indicator
will light up blue and red respectively.
Adjusting the Volume
Press VOLUME +/– to adjust the volume.
8
socket.
Right Speaker
Advertisement
Table of Contents
