Depression Cylinder; Figure 3-16: Depression Cylinder Remove & Replace - Upright TM12 Service & Parts Manual

Maintenance
TM12 Work Platform - European
D C
EPRESSION YLINDER
R
EMOVAL
1. Mark and disconnect
the hose assemblies
from the cylinder fit-
tings and immediately
cap the openings to pre-
vent foreign material
from entering.
2. Place a support under
the depression guard.
3. Remove the cotter pins
from the pivot pins.
4. Remove the pivot pins
while supporting the cyl-
inder.
5. Remove the cylinder.
R
EPAIR
Reference: • "3.11 Cylinder Repair" on Page 3-18
Depression Cylinder Seal Kit, Part Number: 065970-011
I
NSTALLATION
Installation is reverse of removal.
Figure 3-16: Depression Cylinder Remove & Replace

1. Depression Cylinder

2. Pivot Pin
3.11 - Cylinder Repair
2
2
4
3. Cotter Pin
4. Depression Guard
Page 3-19
1
3
4