2.4 - Transporting Work Platform; Figure 2-6: Transporting The Work Platform - Upright TM12 Service & Parts Manual

Operation and Specifications
2.4 T
RANSPORTING
B
B
B
Forklifting is for transporting only.
See specifications for weight of work platform and be certain that forklift is of
adequate capacity to lift the work platform.
Overtightening of chains or straps attached to tie down lugs may result in
damage to work platform.
TM12 Work Platform - European
W P
ORK LATFORM
F
Y ORKLIFT
Forklift from the side by lifting under the
chassis modules.
C
Y RANE
Secure straps to chassis lifting/tie down
points only.
T
Y RUCK
1. Maneuver the work platform into trans-
port position and chock wheels.
2. Secure the work platform to the trans-
port vehicle with chains or straps of
adequate load capacity to the chassis
lifting/tie down points.
3. Open the Emergency Lowering Valve.
The platform must be in the fully low-
ered position for transport.
D A N G E R
!
C A U T I O N
!

2.4 - Transporting Work Platform

Figure 2-6: Transporting the Work Platform

!
!
Controller Assembly
Page 2-7