Transporting The Work Platform - Upright SL20 Operator's Manual

T
RANSPORTING
B
Forklifting is for transporting only.
See specifications for weight of work platform and be certain that forklift is of
adequate capacity to lift work platform.
B
Overtightening of chains or straps through tie down lugs may result in
damage to work platform.
Page 6
T W P
HE ORK LATFORM
F
Y ORKLIFT
D A N G E R
!
Forklift from the side by lifting under the chassis modules.
T
Y RUCK
1. Using the Control Handle, lift the platform above eight feet, then lower. The platform will stop
lowering at the Loading Clearance Height.
2. Maneuver the work platform into transport position. Press the Loading Clearance Lowering
Switch to fully lower the platform, then chock the wheels. The platform must be in the fully low-
ered position for transport.
3. Secure the work platform to the transport vehicle with chains or straps of adequate load
capacity attached to the front and rear lift/tie down points on both sides of the chassis.
C A U T I O N
!
Figure 5: Transporting the Work Platform
!
!
SL20