Transporting The Work Platform; By Crane; By Forklift; By Truck - Upright MX19 Service And Parts Manual

Transporting the Work Platform

T
RANSPORTING THE
B C
Y R A N E
Secure the straps to Tie Down/Lifting D-Rings only.
B F
Y O R K L I F T
D A N G E R
!
Forklifting is for transport only.
See specifications for weight of work platform and be certain that forklift is of adequate capacity to lift
the work platform.
The MX19 may be forklifted from the rear end of the machine between the wheels. It may also be forklifted
from the side using the forklift pockets shown in the diagram.
B T
Y R U C K
Manoeuvre the work platform into transport position and chock the wheels. Secure the work platform to the
transport vehicle by attaching chains or straps of adequate load capacity to the Tie Down/Lifting D-Rings.
C A U T I O N
Over tightening of the chains or straps attached to the Tie Down/Lifting D-Rings may result in damage
to work platform.
Page 11
W P
ORK LATFORM
!
Forklift
Figure 6: Transporting the Work Platform
Forklift
Pockets
Tie Down/Lifting D-Rings
Located At Each End
2. Operation Manual