Patton electronics IPLink 2821 Getting Started Manual page 59

IPLink 2800 Series Getting Started Guide
5. Configure the introduced PVCs.
2800(frm-rel)[0/0]#pvc 1
2800(pvc)[1]#encapsulation rfc1490
2800(pvc)[1]#bind interface external router
2800(pvc)[1]#no shutdown
2800(pvc)[1]#pvc 2
2800(pvc)[2]#encapsulation rfc1490
2800(pvc)[2]#bind interface internal router
2800(pvc)[2]#no shutdown
...
6. Check that the Frame Relay settings are correct.
2800(frm-rel)[0/0]#show framerelay
Framerelay Configuration:
Port LMI-Type
----------------------------------------------------------
serial 0 0 0 ansi
PVC Configuration:
Port DLCI
--------------------------------------------------------------
serial 0 0 0 1
serial 0 0 0 2
Serial port configuration task list
Keepalive
20
State Fragment
open disabled
open disabled
4 • Serial port configuration
Fragmentation
disabled
Encaps Binding
rfc1490 external@router
rfc1490 internal@router
59