Displaying Serial Port Information - Patton electronics IPLink 2821 Getting Started Manual

IPLink 2800 Series Getting Started Guide
2800(frm-rel)[0/0]#pvc 1
2800(pvc)[1]#shutdown
Check the PVC 1 status by using
figuration part responsible for this PVC.
2800(pvc)[1]#show running-config
Running configuration:
#----------------------------------------------------------------#
#
# 2500
...
pvc 1
encapsulation rfc1490
bind interface wan router
shutdown
exit
...

Displaying serial port information

The following example shows the commands used to display serial port configuration settings.
HDLC Driver: 0x8496b8
=====================
Slot:
Number of Ports:
HDLC Driver: 0x8496b8
=====================
Slot:
Number of Ports:
Port: serial 0 0 0
------------------
State:
Configuration
Hardware Port:
Port Type:
CRC:
Transmit Edge:
Max Frame Length:
Baudrate:
Recv Threshold:
Serial port configuration task list
show running-config
0
1
0
1
OPENED
X.21
DCE
CRC-16
Normal
1920
64000 bps
1
4 • Serial port configuration
and verify that the entry shutdown occurs in the con-
#
#
55